February 14, 2011
I trimmed the fiberglass along the top edge of the first plank and then pulled off the masking tape. Although it's not perfect, I'm impressed with the way it came out. I am a little worried that I have so much wood flour left--I don't really see where I'm going to use all, and I wonder if maybe I didn't put it on thick enough. When I called CLC, they said it's better to have too much epoxy than not enough. I need to check on whether I should fill in the joint between the transom doubler and the planks.
 |
Trimming the fiberglass with a utility knife.
|
 |
Fiberglass is in place in the bottom of the inside of the dory and trimmed along the edge between planks one and two.
|
No comments:
Post a Comment