Building a Northeaster Dory

Many years ago, I had a chance to take some sailing lessons and was able to use the boats from the university's outing club. Since then, I've always wanted my own boat. After looking at the possibilities, I decided that building a Northeaster Dory from a kit was my best chance. Not only could I sail it, but I could row it with either a fixed seat or sliding seat. Building it is only the first challenge; then I'll need to learn sculling and re-learn sailing.

Friday, July 6, 2012

Solo Sail on the Connecticut River

›
Rigging sail at the boat launch. Captain's log   July 5, 2012 Location:  Lat. N 43º 12'  Long. W72º 28' Weather:    Mostl...
4 comments:
Friday, June 8, 2012

Tying Main Sail to Mast and Boom

›
Plunging into the unknown, I started working on how the sail rig goes together.  It's hard to believe a year has gone by since I bought ...
Wednesday, June 6, 2012

Mounting rudder on dory

›
When I tried to put the rudder on the dory, I discovered that the gudgeons were not lined up right and the pintles would not go all the way ...
Sunday, June 3, 2012

Sea Turtle Insignia

›
June 3, 2012 After a long (really long) delay, I'm finally getting motivated to sail the dory.  While construction is mostly complete, a...
Monday, September 5, 2011

Irene Ends Connecticut River Boating for Awhile

›
The Hoyt's landing parking lot was under water.  The power pole in the center of the picture has a porta-potty chained to it, but yo...
Saturday, August 20, 2011

Rigging the mast

›
August 20, 2011 I've been putting off attaching the hardware to the mast; partly because I've been having fun with the dory and par...
Sunday, August 14, 2011

Mounting the rudder on the dory

›
August 13, 2011 It took a week to put five coats of varnish on each on the rudder, daggerboard, mast, boom and tiller extension.  Each day ...
›
Home
View web version

About Me

vtwayne
View my complete profile
Powered by Blogger.