I mixed up some thickened epoxy to fill in the screws in the bulkhead that is attached to the daggerboard trunk. I also filled in the small hole where the upper plank is attached to the transom. Because I mixed up a little too much epoxy, I decided to do the fillet on the rudder. I had to do some sanding on the pieces first to get them to fit together again. It's tricky to put fillets on both sides of the yoke at once. It took some time to get them somewhat even in size.
 |
| The yoke is attached to the rudder with big fillets of thickened epoxy. |
No comments:
Post a Comment