3rd coat of epoxy on bottom of hull

Doing some work on the dory has helped me get past the funk I'm in.  One good thing about a project like this is that it gets me up and moving and doing something.  I sanded the outside of the hull down with 220 grit sandpaper again, and put on the third coat of epoxy. I was surprised that when the second coat dried, the surface was rough and bumpy, but sanding help smooth things out.  I'm concerned that I'm going to run out of epoxy--I don't think there will be enough to do the inside of the boat. The surface is looking better and the weave of the fiberglass is almost gone.

The third coat of epoxy is done.  The weave of the fiberglass is almost all gone.